How to properly maintain and store anti-static shoes?

Anti-static shoes are a kind of work shoes worn in production workshops and laboratories of microelectronics industries such as electronic semiconductor devices, electronic computers, electronic communication equipment, and integrated circuits to reduce or eliminate the hazards of static electricity. Static electricity is very harmful to electronic products, but it is difficult to identify with the naked eye. Wearing anti-static clothing and shoes is a more effective way to solve the hazards of static electricity. People know more about anti-static clothing, including procurement and storage, but they may not pay much attention to the maintenance and storage of anti-static shoes. In fact, this idea is very dangerous. The maintenance and storage of anti-static shoes also need to be paid attention to. The following protective products exhibition will introduce the storage method and precautions for the use of anti-static shoes.

1. During transportation, the packaging of anti-static shoes must not be damaged, and the surface should be covered to prevent sun exposure and high temperature; it is strictly forbidden to use hand hooks to drag during transportation.

2. Anti-static shoes should be stored in a dry and ventilated warehouse to prevent mildew and deterioration.

3. In terms of maintenance and care, anti-static shoes should be washed with neutral detergent as much as possible. Do not mix with other clothes when washing. Use hand washing or washing machine soft wash program to prevent conductive fibers from breaking. The washing water temperature should be below 40℃, and rinse with clean water at room temperature. The washing time should be as short as possible, but it must be fully rinsed to remove residual detergent.

4. In the use place, the floor should be anti-static when wearing anti-static shoes. Wearing anti-static shoes should not be worn with insulating woolen thick socks and insulating insoles at the same time, and the soles should not be sticky with insulating materials. Anti-static shoes should be tested regularly to decide whether to replace them.

How to make anti-static shoes last longer?

1. The place where anti-static shoes are worn must be an anti-static floor. Except for this place, anti-static shoes cannot be worn anywhere else.

2. In order to achieve better results of work shoes and the cleanliness of the workshop, some soles should be checked before wearing to see if there are insulating objects and other dirt. If there are, they need to be cleaned before wearing anti-static shoes to enter the workshop normally.

3. Anti-static shoes need to be tested regularly during wearing. If they pass the test, they can continue to be used. If they fail the test, they need to be replaced in time.

4. Work shoes need to be cleaned like ordinary shoes, and they should be cleaned regularly. Do not determine the cleaning frequency based solely on the surface of the work shoes.

If you can keep in mind all the content about anti-static shoes introduced in the protective products exhibition, then it can help you extend the service life of anti-static shoes to the greatest extent and allow them to be used for a longer time.


Post time: Mar-27-2025